Chapter 6
Tools Required
Version 1.1
Written by Rickey
Horwitz
This list is compiled from all the completed chapter's tool requirements.
- 3/4" Conduit Bender
- #Q drill bit (.3320")
- #Y drill bit (.4040) alternate .421" or 27/64"
(10.8mm)
- 1/16" drill bit
- 23/64" Drill
- #29 Drill
- 1/2" SAE drill bit
- 3/8" SAE drill bit
- 5/16" SAE drill bit
- #I SAE drill bit (.2720")
- #U SAE drill bit (.3680")
- 1" Bi-metal Hole saw
- 1-1/8" Bi-Metal Hole Saw
- 1.25" Bi-metal Hole saw
- 1.5" Bi-metal hole saw
- 2" Bi-metal Hole saw
- 3.5" Bi-metal Hole saw
- 7/8" (.875) Bi-metal Hole saw
- 5/8" hole saw
- Stainless Steel Wire Brush
- Hack saw
- Drill Press
- 3/8 x 24 TPI SAE tap
- 12mm x1.75 Metric tap, alternate 12mm x 1.25
- 10 MM x 1.0 Metric Tap
- 8 x 32 UNC SAE Tap
- 5/16 x 24 TPI UNF Tap
- Ruler and tape measure
- Compass
- Computer and Printer
- Metal Band Saw
- Metal Drum/Belt Sander
- Assorted metal files and emery cloth
- Spring Clamps, 3-6", 3 ea.
- TIG Welding apparatus using 100% tungsten 1/8 inch diameter
tip
- Metal Lathe, optional
- Shear optional
- 1" solid dowel, either aluminum or steel
- 16 oz. Hammer or mallet
- MAP torch
- Random sections of wood used for setup (as required)
- Tube Cutter
- All Thread, 3/8 x 24 x 7"
- 4 ea. 3/8 x 24 nuts
Back